VP-Series
Portable MPI Power Source
Range from 1500Amps to 3,000Amps
Download TDS- Mobile Power Source of maximum current output AC/HWDC (Maximum output to be measured with (Standard Mag Cables 120Sqmm X 5Mtrs X 2 Nos with Prods)
- Line Input 415 Volts, 50Hz, 3Phase.
- Thyristorised, infinitely variable current control.
- ‘F’ class insulation.
- Digital Ammeter for current indication.
- Provision for Quick Changing over of Cables from AC to DC.
- Safety Interlocking limit switch for AC/DC.
Description
Reviews (0)
Shipping & Delivery
Related products
Demagnetiser
Demagnetiser unit removes residual magnetism after magnetic particle inspection in non-destructive testing, Demagnetization of ferromagnetic parts, Industrial Demagnetizing is not an easy task, unless an effective demagnetizing system is used. It is especially difficult when the magnetic field must be reduced to a very low level.
Types of Demag System
1. Compact Table-Top with SS Chute.
2. Track & Trolley.
3. Conveyor Type.
ZC-9D
AC/HWDC Electromagnetic Yoke
The light weight electromagnetic yoke is the ideal tool for detection of surface or sub-surface cracks and flaws in any ferromagnetic material. No other low cost, portable equipment offers such versatility in Magnetic Particle Inspection. Fast and simple to operate, it is widely used with either dry or wet method fluorescent or non – fluorescent magnetic powders, in the testing of welds, automotive or railroad components, machine parts, steel and grey iron castings, forgings and in plan inspection, maintenance and repair.Technical Specifications
- Input supply – 220V, 50Hz, 1 Ph
- Input current – 2 Amps
- Distance across poles – 0 to 300 mm
- Magnetic field AC – Constant level, DC-Pulsed, infinitely variable.
- Lifting power Approx. 27 Kg. at 100mm spacing HWDC mode.
- Yoke Weight 3.5 Kgs approx.
- Controls On/Off Switch, AC/DC Switch, DC Field intensity potentiometer
ZChek F18W
Water based Fluorescent Magnetic Particle
ZChek F18W is a Brown Colored water based Magnetic Particle Powder designed to be fluorescing Bright Yellow- Green under UV Light. ZChek F18W consists of ultra-high sensitivity particles for detection of very fine discontinuities in Ferromagnetic materials. Using the state-of-the-art encapsulation technology, ZChek F18W is manufactured to exhibit excellent properties (High permeability, low retentivity, high mobility and optimum particle distribution) required for high sensitive fluorescent MPI process. Special additives in F18W provide excellent particle mobility in water medium and avoid flash rusting of parts.
Batch Certificate 
ZC-230 Series
Standard MPI Bench Equipment
The Magnetic Particle Inspection Equipment ZC 230 is designed and manufactured to deliver 2500 Amps AC / 3000 Amps FWDC. The 1phase FWDC is extremely useful to detect Near surface discontinuities whereas the AC is used to detect Surface discontinuities. Independently controlled contact and coil circuits determines superior indication visibility.
ZChek NF Red
Colored Non-fluorescent Magnetic Particles
ZChek NF Red is red dry powder, formulated to be used in wet method Magnetic Particle Inspection to detect discontinuities on light coloured surfaces for optimum colour contrast. NF Red may be suspended in either Z801 cart oil or in water. When water is used as vehicle, use conditioning agent – ZChek WA9
ZChek WA-9
Water Conditioner
ZChek WA-9 is a water conditioner used as wetting agent in magnetic particle inspection when water is used as a carrier. WA9 can be used with either ZChek F9 or ZChek F18 at recommended concentration to get desired results while using water as a carrier medium. WA9 has wetting agents, corrosion inhibitors and antifoaming agents which enhances in wet method magnetic particle testing.
ZC-9
AC Electromagnetic Yoke
AC electromagnetic yoke, ergonomically designed to improve productivity and reduce operator arm and wrist fatigue. The yoke generates a strong AC magnetic field for the detection of surface indications during magnetic particle testing. Lightweight with an ergonomic grip and trigger, the ZC-9 is designed for the rugged demands of field inspection. Featurin a rugged cord and an isolated trigger switch; the ZC-9 is easily serviceable.Technical Specifications
- Input supply – 220V, 50Hz, 1 Ph
- Distance across poles – 0 to 300 mm
- Lifting power Approx. 4.5Kg. at 100mm spacing
- Yoke Weight 2.5 Kgs approx.
- Controls On/Off Switch.
Reviews
There are no reviews yet.